note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0119d doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / 1n70 __ __ __ screening 2 / __ = not screened tx = tx level txv = txv s = s level package type _ _ = axial leaded sms = surface mount square tab voltage/family 66= 50v 67 = 100v 68 = 150v 1n7066 thru 1n7068 and 1n7066sms thru 1n7068sms 10 amp 50 150 volts 30 ns hyperfast recovery rectifier features: ? hyper fast reverse recovery: 30ns maximum 4 / ? high surge current: 325 a maximum ? hermetically sealed ? low forward voltage drop .95 @10a ? void free chip construction ? solid silver leads ? available in axial & square tab versions ? tx, txv, and s-level screening available 2 / ? axial lead higher current replacements for: 1n5807, 1n5809, 1n5811 ? possible sms replacements for stud mount : 1n5812, 1n5814, 1n5816 maximum ratings 3 / rating symbol value unit peak repetitive reverse voltage and dc blocking voltage 1n7066 1n7067 1n7068 v rrm v rwm v r 50 100 150 volts average rectified forward current (axial tl 55 c; sms tec 100 c ) 5/ i o 10 amps peak surge current (8.3 ms pulse, half sine wa ve, superimposed on io, allow junction to reach equilib rium between pulses, t a = 25 c) i fsm 325 amps operating & storage temperature t j and t stg -65 to +175 c thermal resistance junction to lead for axial, l =.125" junction to end tab for surface mount r jl r je 8 4.5 c/w notes: 1 / for ordering information, price, operating curves, and availability- contact factory. 2 / screening based on mil-prf-19500. scr eening flows available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4 / i f = 1a, i r = 1a, i rr = 0.1a, t a = 25 c 5 / operating at higher io currents may be achieved based on specific application and device mounting if tj is maintained below 175oc. axial leaded sms
note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0119d doc electrical characteristics 3 / characteristics symbol value unit max instantaneous forward voltage drop i f = 6.0 adc , t a = +25 c, 300 s pulse i f = 10 adc , t a = 25 c, 300 s pulse i f = 20 adc , t a = 25 c i f = 6 adc , t a = 125 c i f = 6 adc , t a = -55 c v f1 v f2 v f3 v f4 v f5 0.900 0.950 1.020 0.85 1.05 vdc reverse leakage current rated v r , t a = +25 c, 300 s pulse minimum rated v r , t a =+100 c, 300 s pulse minimum i r1 i r2 20 1 a ma junction capacitance v r = 10 vdc, f = 1mhz, t a = 25 c c j 80 pf reverse recovery time i f = 1a, i r = 1a, i rr = 0.1a, t a = 25 c t rr 30 ns package outlines : dimensions (inches) dimensions (inches) dim. minimum maximum dim. minimum maximum a .135 .165 a .172 .180 b .135 .155 b .180 .220 c .037 .042 c .020 .028 d 1.000 --- d .002 --- axial sms solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 1n7066 thru 1n7068 and 1n7066sms thru 1n7068sms
|